Thread: Poland 2016 news...
Results 31 to 39 of 39
|
-
- Join Date
- Jul 2014
- Location
- Poland
- Posts
- 327
-
#32 Re: Poland 2016 news...10-29-2015, 07:00 PM
I noticed that too, who knows the whole associating with and without any affiliation is very common in China.
Another issue is that some Chinese manufactures use other Chinese manufacturers as an OEM, the primary sells a certain model and outsources that production to the secondary. That secondary also could be an OEM for another manufacturer, which also sells it under three of its own brand names. So the source of a CG125 could be one factory that is an OEM for others that are assigning it multiple names, they may or may not follow the convention, for example if Loncin contracts another factory does it use its own WMI or do they use the WMI of the actual factory? The later should be used since the purpose is to be able to track back to the source. I really doubt that Loncin would contract for the production with a company that is on the other side of the country. I am not sure if Loncin offers a CG125 that is so close to the original, but since they sell so many it is possible.
I am not saying this is a Loncin, more that not all Loncins are made in the same factory and not all are made to the same standards. I am only using Loncin as an example. Overstating production could be a matter of them counting production that they can buy out of other factories, in that some may be Hahaha counted thrice?
Loncin sells a model called an LX125-71, it is entirely possible they outsource the production of those to another factory, but there are some difference in this model and theirs.Last edited by MJH; 10-30-2015 at 10:23 AM.
-
#33 Re: Poland 2016 news...
- Join Date
- Jul 2014
- Location
- Poland
- Posts
- 327
-
#34 Re: Poland 2016 news...11-12-2015, 07:35 PM
Fosti is in Guangdong and ZNEN is in Zhejiang, separate, however I believe that they share production.
Fosti makes the motorcycles, which are also branded ZNEN.
http://zhongneng.en.alibaba.com/prod..._sale_CBF.html
-
#35 Re: Poland 2016 news...11-12-2015, 07:49 PM
Let’s use Suzuki for an example, they have a partner in order to gain the partner they offer a model to the partner to make and sell under its brand, then you have two models one Suzuki and one the other brand. The other brand may need more then they can make so they contract a third to make them, in exchange they can sell them as well, under a third brand, now you have real Suzuki, second brand Suzuki, also third and forth….
Now one company makes its own new model, they get orders beyond capacity so they hire another company to fill the production gap, in exchange they may make it under its own brand name.
This is because they have to have enough of an order to justify production, half for you and half for me, the costs of production are linear they drop as unit number are increasing. At capacity is ideal for cost minimization. So if they go beyond capacity they outsource.
-
#36 Re: Poland 2016 news...
-
#37 Re: Poland 2016 news...05-25-2016, 11:44 PM
Romet is importing the Daelim models and branded them as RMT.
It is not entirely clear where these are manufactured as Shineray is an OEM for Daelim.
The Roadwin 125R has a water cooled DOHC 4valve engine, at the A1 Limit @15 hp.
A RMT Roadwin 125R in Poland costs
A Dailem Roadwin in Spain costs14,999.00 PLN = 3,795.49 USD
2,799.00 EUR = 3,121.09 USD
Shineray does not offer the DOHC 125 model.
The last version Shineray released in China is this model...250cc DOHC.
16,300.00 CNY = 2,487.41 USD Last edited by MJH; 05-26-2016 at 07:46 AM.
-
#38 Re: Poland 2016 news...05-26-2016, 07:41 AM
Shineray also makes the Daystar.
-
#39 Re: Poland 2016 news...
« Previous Thread | Next Thread » |
Similar Threads
-
2016 Cleveland Cyclewerks Gen II Misfit
By catseye in forum Industry News and Moto TalkReplies: 2Last Post: 11-07-2015, 11:56 PM -
Changes in EC, 2016
By Cardillac in forum Off Topic DiscussionsReplies: 4Last Post: 01-09-2015, 06:34 PM -
News from Madagascar
By papaian in forum Welcome to MCM!Replies: 0Last Post: 08-19-2012, 09:26 AM -
Hello from Poland
By filipu in forum Welcome to MCM!Replies: 5Last Post: 07-27-2011, 12:57 AM -
Martin from Poland
By mm1000 in forum Welcome to MCM!Replies: 1Last Post: 11-23-2010, 12:14 PM