Shineray X1 - mixed CG engine to bike?!

**MJH** · 03-08-2016, 01:08 AM

Here is a video in Spanish that actually cover the stator and CDI in detail.
https://www.youtube.com/watch?v=_92f9HUBnBw

we need an interpreter.

**MJH** · 03-08-2016, 01:40 AM

this one is helpful, https://www.youtube.com/watch?v=q9-mr7BXIho

**NZBrakelathes** · 03-08-2016, 02:42 AM

Is the stator for Ac and DC the same ? Just a connection difference? Yes or no ?

**humanbeing** · 03-08-2016, 05:06 AM

Originally Posted by NZBrakelathes

Is the stator for Ac and DC the same ? Just a connection difference? Yes or no ?

Stator that had "AC-source" can use BOTH , connection difference ONLY vs "ALL dc" stator (often 3 yellow | NO red/black )

**NZBrakelathes** · 03-08-2016, 05:08 AM

Originally Posted by humanbeing

Stator that had "AC-source" can use BOTH , connection difference ONLY vs "ALL dc" stator (often 3 yellow | NO red/black )

Thank you! Yes I thought that was the case by looking at my other square type loom and info here

What ohms values should I see?
Or what volt values should I see?
Then I can test to confirm if good or bad

**humanbeing** · 03-08-2016, 05:17 AM

Modern Honda shop manual https://josemaco.files.wordpress.com...h-62ktjam5.pdf won't say ohms in ign system anymore...
AC-source: 100 V minimum | pickup: 0.7 V minimum | pink/Yellow seems good: Charging coil resistance 0.3 – 1.2 Ω (20°C/68°F)
ign Coil http://sanxin.com.cn/info5/index.asp?id=20

**NZBrakelathes** · 03-08-2016, 05:20 AM

Originally Posted by humanbeing

Modern Honda shop manual https://josemaco.files.wordpress.com...h-62ktjam5.pdf won't said ohms anymore...
AC-source: 100 V minimum | pickup: 0.7 V minimum

AC source is the pink to yellow?
Pick up is the blue white to green?
This is a DC ignition system? Doesn't use black with red?

**humanbeing** · 03-08-2016, 05:36 AM

Originally Posted by NZBrakelathes

AC source is the pink to yellow?
Pick up is the blue white to green?
This is a DC ignition system? Doesn't use black with red?

Pink / Yellow = light & charging http://www.dansmc.com/electricaltesting.htm
AC-source http://www.dansmc.com/cdiignition.htm
Then , check there's DC14.?v (indicates reg & battery is running) to VDD (the "lone" wire in CDI's 2-pin )

**NZBrakelathes** · 03-08-2016, 07:27 AM

Ok I tested charge 13.5v at ideas to 15v at revs no battery
AC which is the wire not used black with red to earth 240 Volts AC and silly me used my fingers to try hold the rest lead to it! Wahoo what a shock! Lucky it's little current or I'd be dead