Results 41 to 50 of 100
|
-
- Join Date
- Jun 2009
- Location
- Jacksonville Florida
- Posts
- 36
06-29-2009, 10:47 PMthat would be the first ive ever seen when more air equal less HP :D lol how far is orlando from jax?
-
- Join Date
- Jun 2009
- Posts
- 21
06-29-2009, 10:54 PM
-
- Join Date
- Jun 2009
- Location
- Jacksonville Florida
- Posts
- 36
06-30-2009, 12:43 AMso leaving the airbox on is better? i just remember racing MX i used clamp ons
-
- Join Date
- Oct 2008
- Location
- Stafford, Texas USA
- Posts
- 59
06-30-2009, 01:56 AMRemoving the airbox and on these CV carbs will kill your power for sure. CV type carbs have to have a certain volume of air flow to work correctly.
Just by an aftermaket racing filter and put it in the stock airbox.Qlink XF200 Flat Black MODS: P&P Exhaust Pipe-125 Main Jet-35 Idle Jet-Jet Needle Clip On Forth From Top Position-Denso Iridium Spark Plug IX24-Sprocket Specialists #550-16 16T Front Sprocket-SAI Removed-Rear Fender Cut Off-Brake Light Flasher-55 Watt Headlight Bulb
-
- Join Date
- Jun 2009
- Location
- Jacksonville Florida
- Posts
- 36
06-30-2009, 02:34 AMwhat about a larger carb?
-
- Join Date
- Oct 2008
- Location
- Stafford, Texas USA
- Posts
- 59
06-30-2009, 02:58 AMYou could put a larger carb or even a different type of carb...there is alot of talk on here about slide carbs.
If you went with a slide carb you could stay the same size as stock and actually gain air flow because of the way they work.
Here is a link about carbs: http://www.mychinamoto.com/forums/showthread.php?t=783
Here is a link about aftermarket air filter: http://www.mychinamoto.com/forums/showthread.php?t=775Qlink XF200 Flat Black MODS: P&P Exhaust Pipe-125 Main Jet-35 Idle Jet-Jet Needle Clip On Forth From Top Position-Denso Iridium Spark Plug IX24-Sprocket Specialists #550-16 16T Front Sprocket-SAI Removed-Rear Fender Cut Off-Brake Light Flasher-55 Watt Headlight Bulb
-
- Join Date
- Jun 2009
- Posts
- 21
06-30-2009, 03:00 AM
-
- Join Date
- Jun 2009
- Location
- Jacksonville Florida
- Posts
- 36
06-30-2009, 11:40 AMyes i dont mind doing this but a 30mm mikuni slide carb is only 39 bucks new on ebay
-
- Join Date
- Jun 2009
- Posts
- 21
-
- Join Date
- Oct 2008
- Location
- Stafford, Texas USA
- Posts
- 59
06-30-2009, 01:40 PMYou have to remember that the carb we have is 28mm and so are the mounts. If you go with a bigger carb you will have to try to find a bigger rubber mount for the engine side as well as the airbox side.
Qlink XF200 Flat Black MODS: P&P Exhaust Pipe-125 Main Jet-35 Idle Jet-Jet Needle Clip On Forth From Top Position-Denso Iridium Spark Plug IX24-Sprocket Specialists #550-16 16T Front Sprocket-SAI Removed-Rear Fender Cut Off-Brake Light Flasher-55 Watt Headlight Bulb
« Previous Thread | Next Thread » |