Thread: CCW tha Heist
Results 1,701 to 1,708 of 1708
|
-
#1701 Re: CCW tha Heist
- Join Date
- Jul 2015
- Location
- Canada
- Posts
- 6
-
#1702 Re: CCW tha Heist
- Join Date
- Jul 2015
- Location
- Canada
- Posts
- 6
08-14-2015, 05:26 PMWhat is the concensus on cutting the stock exhaust pipe?
Is there a catalyst and a baffler in there?
I want to disassemble and clean the carb, as I have lots of stumbles and poor starts. I figured I would rejet it, do the EVAP block off plate and cut the exhaust (since buying a new pipe from G&D is too much $$$).
Will I get the same gains from just cutting the pipe as ding the G&D exhaust. Any recommendation on which jets to use?
-
#1703 Re: CCW tha Heist
- Join Date
- Jul 2015
- Location
- Texas USA
- Posts
- 7
08-27-2015, 06:57 AMI cut my stock pipe and yes there is a baffle you have to remove. Its not the easiest thing to do so be sure to clean up the cut you made on the pipe before you try to pry it out. My next mod will be the carb. Cutting the pipe has a nice gain in itself but be ready for the noise level if you get over 55mph to be ear busting. At 55mph or less it sounds great. I love the sound and am glad I chopped it. I have over 1000klm on mine and am on it 5 days a week at least.
As far as what every one negative said about the bike I will say this. I have replaced 2 light bulbs, adjusted the chain once, tightened the mirrors once, adjusted the seat and locked the bolts down as it had too much wobble side to side causing the big to wobble a lot at 60mph. I have had nothing fall off yet. I will be updating this again in a week or so.
-
- Join Date
- Nov 2011
- Location
- fuck off
- Posts
- 528
08-27-2015, 07:06 AM2 and 4 sounds right
4 thou for exhaust as it's the hotter
Intake is cooler air etc
-
- Join Date
- Jun 2016
- Location
- Gauteng, South Africa
- Posts
- 3
06-12-2016, 08:49 AMMorning all
Sent from my E39 using Tapatalk
-
#1706 Re: CCW tha Heist
- Join Date
- Jul 2016
- Location
- South Africa
- Posts
- 2
08-16-2016, 05:15 AMHi, does anyone know what the JT part number is for the front sprocket for the Hesit? I am trying to order a 16t online.
-
#1707 Re: CCW tha Heist
-
#1708 Re: CCW tha Heist
- Join Date
- Jul 2016
- Location
- South Africa
- Posts
- 2
08-16-2016, 07:20 PMInteresting - from my measurements the JTF259 has a minor diameter too big at 18mm, I am measureing around 16.5mm (lets say 17mm). Then the JTF1264 spline key size is too big at 5mm (I measure 4mm). Closest to me looks like a JTF1263 which is a 16mm inner diameter, mount that on the lathe and grind or bore it out to 17mm.
« Previous Thread | Next Thread » |
Similar Threads
-
CCW
By MJH in forum StreetReplies: 259Last Post: 06-12-2016, 06:39 AM -
My day at PIT Motors LTD and the CCW Tha Heist
By Gardo in forum StreetReplies: 138Last Post: 05-12-2011, 06:08 AM
Tags for this Thread |