Results 6,161 to 6,170 of 6336
|
-
- Join Date
- Nov 2011
- Location
- fuck off
- Posts
- 528
-
#6162 Re: Dong Fang DF 250 RTB Bobber Information
- Join Date
- Mar 2017
- Location
- Illinois
- Posts
- 16
08-31-2017, 01:21 AMNow that would look like poo wouldnt it? I like my toys to look clean and neat not like my 6 year old took the impact drill to the side of it! The plate that cycledorks sell looks thick, clean and only 14$ (when its in stock)! Im not lazy just dont want it to look halfass!
-
- Join Date
- Nov 2011
- Location
- fuck off
- Posts
- 528
08-31-2017, 05:22 AMProfile cut one, send the gasket to a shop and get them to cut nicely
$14 is expensive but ok if you like it that way no issues. You can cut a new gasket but don't cut the whole for air flow and then no flow no function and another way to have it solve.
$15 I can send you this as I've got them in stock - simple and tidy but not super sexy but yeah up to you.
Sent from my iPhone using Tapatalk
-
#6164 Re: Dong Fang DF 250 RTB Bobber Information
- Join Date
- Mar 2017
- Location
- Illinois
- Posts
- 16
08-31-2017, 08:08 PM21151477_10214185188728660_8353305461912894346_n.jpg21271335_10214185187048618_5274186599266876822_n.jpg
I call "it" Snot! Maybe u guys can help with some cosmetic stuff? Ammo box for the battery box? Im not military so trying to find something for the electronics to! Any suggestions?
-
#6165 Re: Dong Fang DF 250 RTB Bobber Information
-
#6166 Re: Dong Fang DF 250 RTB Bobber Information09-01-2017, 02:58 PM
engine blown yet again... this time a cylinder bolt was burned through because I was never able to find the exact cylinder for this engine.
Oddly enough i didn't actually lose that much compression.
Anyway before i have to fab one, anyone ever seen these for sale?
Boy the 167fmm proves to be a nice "reliable" engine until you actually have problems and cant get "reliable" parts in the states...
-failed valve
-failed piston/rings
-failed/incorrect cylinder
I have to nip this crap at the bud... ive found a Yamaha xv250 with less than 3k miles for $400, and have been speaking to a guy in japan who did the swap.
I hope to get that done over the winter... but for now... cylinder stud anyone?Last edited by axa; 09-01-2017 at 05:10 PM.
-
#6167 Re: Dong Fang DF 250 RTB Bobber Information09-01-2017, 07:55 PM
You would do well to put your expertise into the Yamaha. NO problem on parts and close to 80mpg. That model has been around over 20 years.
The main problems are a dirty carb from sitting with today's gasoline and corroded connectors . Sometimes the intake manifold rots from old age.2011 Yamaha Star 250
2010 DF 250 Bobber (sold)
2009 Triumph Bonneville T100
1993 Kawasaki Vulcan88(sold)
-
#6168 Re: Dong Fang DF 250 RTB Bobber InformationVince
2021 Ural cT
2022 Dong Fang DF250RTG
2021 Ice Bear 150cc scooter
2020 Ice Bear 150cc Scooter
-
#6169 Re: Dong Fang DF 250 RTB Bobber Information09-02-2017, 03:37 PM
Fab them all and do some decent hardening. It won't be a problem for you.
That way, you will kill two bird with one stone - you'll get your studs AND (which is even more important), you'll convince your lady one more time, that those chunks of cast iron named "South Bend" and "Brigdeport" are NOT clogging garage - they are essential for nowadays household.
And don't hesitate to squeeze "Virago's" twin in your DF - it'll be a... "mechanical delicacy".Ask me nothing - I DO NOT speak english. Really...
-
#6170 Re: Dong Fang DF 250 RTB Bobber Information09-02-2017, 03:59 PM
Here is a forum that might help,if you run into problems,with the Yamaha XV250. ViragoTechForum.com • View forum - Yamaha Virago XV250
2011 Yamaha Star 250
2010 DF 250 Bobber (sold)
2009 Triumph Bonneville T100
1993 Kawasaki Vulcan88(sold)
« Previous Thread | Next Thread » |
Similar Threads
-
Help ID this customized chinese bobber please?
By fonzerelli in forum StreetReplies: 6Last Post: 01-16-2022, 01:39 AM -
DD350E-2 Bobber
By xacarrere in forum Manufacturers and ImportersReplies: 2Last Post: 08-28-2015, 12:03 PM -
Bobber Bikes
By Geronimo in forum SidecarsReplies: 12Last Post: 07-20-2011, 05:02 AM -
my 2nd 16 inch bobber
By Geronimo in forum SidecarsReplies: 3Last Post: 09-13-2010, 11:10 AM -
JH600B Information Wanted
By blazeafar in forum Welcome to MCM!Replies: 1Last Post: 04-29-2008, 12:38 PM
Tags for this Thread |