Results 1 to 3 of 3
|
-
#1 Carb Trouble wheres the fuel/mixture screw?
- Join Date
- Nov 2017
- Location
- UK
- Posts
- 4
01-28-2018, 04:31 PMOn my Kids Sinnis Eagle 125 (2015 in UK)
I got a small Exhaust for him which is fitted well with a few welds as OEM exhaust was falling to bits,
due to being neglected by previous owner
But after switch on with new exhaust
After decelerate it pops and small flames
I Have found the Idle screw but cant see the fuel/mixture screw to adjust
Is this correct to look for or is it something else ?
Have attached pics of what I can see below
IMG_20180128_153715.jpgIMG_20180128_153725.jpgIMG_20180128_153730.jpgIMG_20180128_155048.jpgIMG_20180128_155058.jpg
-
#2 Re: Carb Trouble wheres the fuel/mixture screw?
- Join Date
- Nov 2017
- Location
- UK
- Posts
- 4
01-28-2018, 04:40 PMLast edited by EwOKiE; 01-28-2018 at 05:11 PM.
-
#3 Re: Carb Trouble wheres the fuel/mixture screw?
« Previous Thread | Next Thread » |
Similar Threads
-
Pulse Adrenaline unmodified Basic Carb screw settings ?
By Sprocket in forum Dirt n' Dual-SportReplies: 2Last Post: 02-11-2013, 02:04 PM -
Fuel leak from carb
By spencer2004 in forum MaintenanceReplies: 0Last Post: 06-23-2012, 03:27 PM -
air fuel screw pulse adrenaline 125
By pulsepat in forum Modifications (Cosmetic and Performance)Replies: 1Last Post: 07-07-2011, 10:04 PM -
ajs dd125e carb settup single carb chengway and increase speed
By biker paul in forum Modifications (Cosmetic and Performance)Replies: 1Last Post: 02-21-2010, 02:57 PM -
Standard Air/Fuel mixture and Idle screw Settings for a Mikilon M96 125-SB
By da beard in forum MaintenanceReplies: 3Last Post: 10-23-2009, 06:42 PM