Results 1 to 9 of 9
|
-
#1 CFmoto 650nk exhaust same as er6n??11-02-2015, 05:47 PM
Greetings from the US! I have been on the hunt for an exhaust system for my 2014 cfmoto 650nk. I have noticed that the er6n pipes are eerily similar...refer to the pics. My question is, has anyone had any visual confirmations that the systems are indeed the same? Or has anyone actually used a er6n pipe on their 650nk?
Thanks!!
er6n.jpg[ATTACH=CONF650.jpgIG]17778[/ATTACH]
-
#2 Re: CFmoto 650nk exhaust same as er6n??
- Join Date
- Sep 2015
- Location
- Taiwan
- Posts
- 22
11-02-2015, 11:36 PMI think the very early er6 exhausts are a full system, where as the 650nk and later er6 are the same.
-
#3 Re: CFmoto 650nk exhaust same as er6n??11-02-2015, 11:40 PM
I hope someone can chip in with an answer from personal experience, and ideally with some actual data.
My 2c. They aren't the same. The CFMOTO engine and fueling are different. As aftermarket mufflers and exhaust systems change within manufacturers according to the year it would be very unlikely you could shove an ER6N pipe on and expect an hp and torque improvement. You would certainly find a weight saving and a sound improvement which might make a psychological impression of performance improvement, but how it would effect the fueling is an expensive gamble until you put the bike on a dyno. The CFMOTO is based from a 2006 ER6 and if I was going to try maybe I'd try that. I think the pipes are close enough you probably wouldn't cause any damage.Without consciousness, space and time are nothing; in reality you can take any time -- whether past or future -− as your new frame of reference. Death is a reboot that leads to all potentialities.
-
#4 Re: CFmoto 650nk exhaust same as er6n??11-02-2015, 11:50 PM
The 650NK and 650TR aka 650YK share the same running gear (engine, transmission etc). If you are looking at just the muffler, 'end-can' that removes the catalytic converter or 'box of tricks' then look at some of the threads/posts listed in this CFMoto 650 Compilation thread as there are a few CF650's that have undergone that muffler transplant including my 650TR.
If you're looking at replacing the whole exhaust system (header pipes included) with something like a Yoshi exhaust system, then that is a different proposition and IMO you'll need a specialist tuner for that...
YMMVLearn the rules like a pro, so you can break them like an artist
- Pablo Picasso
-
#5 Re: CFmoto 650nk exhaust same as er6n??11-03-2015, 01:24 AM
Luckily my dealer has a dyno. Hmmmm....I wonder if an er6n powercommander will fit the nk. That way I can order a system (return it if it doesnt fit, or modify it) and get the Powercommander to help sort out the fueling issue. Problem is, the 650nk is not very popular, yet, here in the States, so parts are hard to find :/
2014 CF Moto 650nk
-
#6 Re: CFmoto 650nk exhaust same as er6n??11-23-2015, 05:36 PM
****UPDATE****
The Kawasaki er6n AND Ninja 650r pipes WILL fit the 650nk perfectly. I ordered a Competition Werks slip on for the er6n and it fit right up. So, if you want to get more choices for pipes, this will open up the market a LOT2014 CF Moto 650nk
-
#7 Re: CFmoto 650nk exhaust same as er6n??12-09-2015, 09:32 PM
How does the new pipe working on your ride? Any improvements or changes?
Ride like the wind but stay safe.
1976 Suzuki B120
1984 Honda NH125 Lead
1986 Honda CX Euro
1988 Yamaha FZ750
-
#8 Re: CFmoto 650nk exhaust same as er6n??12-09-2015, 09:45 PM
The bike is running great! Dyno'd at 60hp with the pipe. I can feel the slight drop in weight. I went ahead and bought the powercommander V (12-008) and is actually at the shop getting tuned. I'll be picking it up this weekend. Check out my other thread for all that info :)
2014 CF Moto 650nk
-
#9 Re: CFmoto 650nk exhaust same as er6n??
- Join Date
- Sep 2016
- Location
- melbourne
- Posts
- 3
09-12-2016, 10:42 AMthe cfmoto has "two" oxygen sensors in the stock header pipes where as the er6n only has one at its at the tail end.
the rest of the pipe seems to be the same.
is this a problem? and how can it be fixed? or worked around
« Previous Thread | Next Thread » |
Similar Threads
-
new levers for cfmoto 650nk
By pommie in forum Modifications (Cosmetic and Performance)Replies: 8Last Post: 07-18-2018, 05:53 AM -
CFMOTO 650NK review at 10,000 km
By ZMC888 in forum StreetReplies: 27Last Post: 02-12-2017, 01:16 AM -
ER6N Rear sprocket fit CF Moto 650NK??
By CrabMan in forum Modifications (Cosmetic and Performance)Replies: 2Last Post: 08-31-2015, 10:15 AM -
Which tires for CFMOTO 650NK/TR?
By ZMC888 in forum StreetReplies: 31Last Post: 05-31-2015, 11:00 AM -
New CFMoto 650NK blog x2
By ZMC888 in forum StreetReplies: 90Last Post: 03-29-2014, 06:38 AM
MedSolutions: Finding Solutions to...
Today, 08:28 AM in Off Topic Discussions