Quote Originally Posted by DanDaMan View Post
I put a 36 on and 4th hits what 5th used to

5th used to top out max revs at 70 , 4th now pushes to 65-70

so instead of a screaming engine on highway , it almost a growl / heavy purr
All this info from everyone has been great. I just have yet to decide what i am gonna do. The inserts in the hub are a tad smaller than the threaded end of the stud.So the bolt holes on the sprocket are slightly bigger,and if i find something to fit into the the inserts in the hub..then the size is too small for the sprocket and will cause issues later. If I remove the inserts,then I have a big hole to deal with.Putting a heli-coil in the inserts only brings me to a smaller bolt for the sprocket... Plus I am thinking too hard on this..and my mind is numb.
Dan- a link to where you got your sprocket would be great..I figure since I already have this apart ..I should get the sprocket now.I like the way yours sounds like it turned out.
Maybe then i can figure out about the studs and go with that. I may just go ahead and order the studs from scooter depot today.. and hopefully get them within a decent enough time.But at the same time order a 36 tooth sprocket while I am at it.