Thread: RMR 125 Running problem
Results 1 to 10 of 13
|
|
Threaded View
-
#5 Re: RMR 125 Running problemC-Moto Noob
- Join Date
- Oct 2010
- Posts
- 3
10-07-2010, 10:02 PM
Thanks for your reply bennell
The bike just stops dead like the kill switch has been pressed! Ive rebuilt the bike cleaned everything and yes it started and ran for 10 minutes then stoped
wouldnt start so I pulled the ht lead off and tryed the spare plug, It had no spark so my next step is a new CDI unit for £30 its worth a try.
Its had a new coil a week ago and will have a new plug put in.
I turned the mixture screw in but untill I can get it run I won`t no where the best setting is.
When I took the plug out that had been cleaned after the 10 minutes it had run it was still sutted up.
If that doesn`t work does anyone know a good bike garage in the Rotherham area that mite be able to fix it.
Thanks for the HELPPPPPPPPPPP
| « Previous Thread | Next Thread » |
Similar Threads
-
Superbyke rmr Plastics question...
By sean fg in forum Modifications (Cosmetic and Performance)Replies: 1Last Post: 07-14-2010, 10:34 PM -
YBR 125 rust problem after 460miles...never seen rain!
By palace15 in forum StreetReplies: 6Last Post: 06-12-2010, 02:36 PM -
clutch problem
By chanley02 in forum MaintenanceReplies: 19Last Post: 06-01-2010, 12:15 AM -
Mechanical help needed - poor starting and running
By casper in forum MaintenanceReplies: 3Last Post: 01-07-2010, 04:00 PM -
How to fit a new exhaust? RMR 125
By NA6CE in forum Modifications (Cosmetic and Performance)Replies: 2Last Post: 08-01-2009, 10:34 PM











What matters more to you on an 18+...
12-25-2025, 07:20 PM in Welcome to MCM!