Thread: Qingqi QM200 USD forks info?
Results 11 to 20 of 26
|
-
07-26-2008, 10:06 AM
Good news folks!
The factory got back to me with the specs for the front for oil capacity.
330ml in each fork tube.
Oil type used is Shell #32-#46
Also got the specs for the pressure in the rear shock...and will post that in the questions to QingQi thread...
CC---------------------------------------------------
Subscribe to the hippest, most happeneing Adventure Motorcycle Magazine around!
Adventure Motorcycle Dual Sport News Magazine
Help support MCM!! Buy "The Return - Riding Western China" DVD! -
http://www.motocyclops.com/buydvd/
Personal China travel info, photo and video site:
http://www.carlparker.com
-
#12 QM200GY-BA USD fork oil capacity and type.
- Join Date
- Jun 2008
- Location
- Gijon, Asturias, Northern Spain
- Posts
- 580
07-26-2008, 10:36 AM
Thanks for that Carl. Made a note of it.
Jincheng Monkey JC50Q-7
Skyteam Dax replica ST110-6
Zongshen ZS125-43
Qingqi QM200GY-BA Super Motard
Qingqi QM110GY
-
-
- Join Date
- Jul 2008
- Location
- Ukraine
- Posts
- 8
07-31-2008, 06:21 PM
I search specifications for torque wrench. You have this information?
-
- Join Date
- Jun 2008
- Location
- Gijon, Asturias, Northern Spain
- Posts
- 580
08-01-2008, 02:52 AM
Jincheng Monkey JC50Q-7
Skyteam Dax replica ST110-6
Zongshen ZS125-43
Qingqi QM200GY-BA Super Motard
Qingqi QM110GY
-
- Join Date
- Jul 2008
- Location
- Ukraine
- Posts
- 8
08-02-2008, 09:21 PM
I search for face values for:
1. еngine head
2. cylinder
3. cross-piece (fastening of the fork, траверса)
4. covers of the block еngine
5. axis of front wheels
6. axis of back wheel
-
- Join Date
- Jun 2008
- Location
- Gijon, Asturias, Northern Spain
- Posts
- 580
08-03-2008, 01:21 AM
Have a look at post number 19 on this thread:
http://www.mychinamoto.com/forums/sh...p?t=321&page=2
I scanned the chassis and engine torque settings for the Suzuki DR200SE.Jincheng Monkey JC50Q-7
Skyteam Dax replica ST110-6
Zongshen ZS125-43
Qingqi QM200GY-BA Super Motard
Qingqi QM110GY
-
-
- Join Date
- Jun 2008
- Posts
- 31
08-15-2008, 05:53 PM
Guys few days ago I finally found time to open front suspension. Good news is we have two springs. So both sides absolutely the same. Was nothing special to disassemble it. Major task was to replace oil. I fill with new Motul fork oil 10W. Well this viscosity just good for some one who ride into town and some offroad. Any one who not only ride but go to jump time to time on cross track need at least 15W. I'm planing to replace my oil again. And my choice 20W. I like to jump.
-
12-02-2008, 05:20 AM
---------------------------------------------------
Kinlon 2008 200GY-SM
Honda 2003 CB250
Life is too short for traffic
« Previous Thread | Next Thread » |