Quote Originally Posted by bowtiewagon View Post
well took the tank off,found the leak.. was at the weld for the mounts, did a cleaning,sanding,cleaning and hit it with JB weld. I decided to do both mounts just in case. now it is about time..as the JB needs to cure .. should have the tank ready by sat...have to work all day today.
bow,
I did the JB weld and it's holding up just fine. I cut some short pieces of black rubber fuel line for spacers on the studs and use some nylon lock nuts but did not tighten them past the locking thread so there should be no pressure on the studs.