Dong Fang DF 250 RTB Bobber Information

[Mixmaster]

Just assembling my bike. Noticed the hose that comes from bottom of Carberator is not connected to anything, should it be?

[xetaprime]

I may be wrong, but I think I've read here- it shouldn't be. That it's the bowl drain hose...

[Mixmaster]

awesome thank you

[bowtiewagon]

Just assembling my bike. Noticed the hose that comes from bottom of Carberator is not connected to anything, should it be?

That is just plain wild that you should post about this. I have been riding my bike for some 3740 miles and I just now (yesterday) saw that this line was not attatched to anything.I went over the bike with a fine tooth comb the day it arrived in the crate,and never noticed it..and i was just about to post a question about this line myself. Thanks for reading my mind.. mixmaster..and thanks for answering it as well xetaprime.

[xetaprime]

[garryo]

Can anyone help me please with the light wiring - tank is off; I found the dark green wire that is connected to the blue and white coming from the front - if I read all the thread information right on this, I should also find a blue white wire coming from the rear of the bike and connect the 2 - problem I have is I don't see this wire frim the rear - should I unwrap all the wires way back into the rear - will I find it I do that?

Thanks

[xetaprime]

Don't know if this will help

Found my headlamp issue.
First photo Blue/Yellow from left controls (really blue/white) was connected to a deep green line to the diode bridge (extra rectifier?) (photo 2). With power on (key on) blue/white to dark green dead. Blue/Yellow on right Illuminating switch (blue/white actually) showing power but connection housing under tank was not to be found.
Found it dead ended in the wrap half way between illuminating switch and connection housing . Disconnected the dark green from the blue/white and connected the two blue/whites together (photo 3). BINGO, headlamps ON, dimable left switch & able to turn off right switch! I'm going to wrap dark green end & take a ride after I put this mess together.
I never did have headlamps. The harley guy (earlier thread) that yelled over to me that my light was dim, I thought was the height adjustment of my lamp. Safety checks during break in failed to see the big bulb not working.

from page 132

I think I read also something about using a black wire connect but haven't found it again. Good luck!

[garryo]

Thanks! I saw this but stiil struggling to find the second blu white wire - probably burried deep - will try to find it next

[SR.MAILMAN]

Thanks! I saw this but stiil struggling to find the second blu white wire - probably burried deep - will try to find it next

You should find it an inch or two back in the harness.

[garryo]

Thanks - I found one blue white wire but don't think it is the right one - this one ends together with a yellow wire in a connection (small white plastic connector with a black plastic cover on the end). I will look deeper down...