Freezerboy the DF uses just a bit over a quart of 10-40 wet clutch oil. check the level of the oil with the dip stick unscrewed in. Yeh...you have the good jets, May still be set way to lean or rich though, they do not set the carb at the factory so you most likley need to fiddle with the Idle screw on side of carb and the air mixture screw on the front side of carb after warm up. Use a small straight blade screw driver Bit to do the air screw as there is no room. Maybe you will get luckey and it will run decent the way it is. Let us know how it goes. Choke up and it will fire right up.