Dong Fang DF 250 RTB Bobber Information

[chruk bashre]

[Bob form NV]

It will leave a nice hole and brackets to mount something else. maybe I"ll stick something like this in there.

100_0790.jpg

Crank case breather for the air filter mod.

[Bob form NV]

Thanks ben2go,

This is just great info on the smog block

[Bob form NV]

i cant wait to read your review.
no backfire or less backfire? same question for popping.
as most do not live in the desert as we do, wondering if
bike reacts the same.[elev.,climate,dry-air..]

I'll let you know.

Elko is a lot different than Vegas though.

I still have to pass the NV inspection so I will wait until after that before doing any mods.

Waiting for the MSO the dealer says is being sent out tomorrow.

Always tomorrow with these guys.

[ben2go]

Thanks ben2go,

This is just great info on the smog block

You're welcome.

[Crelow]

Looks like I can at least hold on to the mirros till I pay off the bike. Look at how you fix them.
Get a pick and pull on the rubber surrounding the mirror. The all you have to do is lock tighten it or just tighen the nut. To think I was gonna superglue or apoxy it.

image.jpg

[skullworkz]

Looks like I can at least hold on to the mirros till I pay off the bike. Look at how you fix them.
Get a pick and pull on the rubber surrounding the mirror. The all you have to do is lock tighten it or just tighen the nut. To think I was gonna superglue or apoxy it.

image.jpg

Just order some from Ebay for $8. I ordered some from China and had them in a week or so. Just remember to use lots of locktite.

[skullworkz]

Check out tcbroschoppers.com , they have some interesting offerings for lights, fake oil tanks and gas tanks.

[Crelow]

Just order some from Ebay for $8. I ordered some from China and had them in a week or so. Just remember to use lots of locktite.

I was gonna buy clutch lever assembly and break, so I mount the new ones on. But i have time I don't have to do to many changes all at once.

But what do you guys think of me putting a piece of sheet metal between the Dildo and the engine to block the smog. Remove the hose and Cap in case i ever need to put it back on.
I definitely want to change the placement of the ignition as my keys keep slapping onto the tank. grinding metal seems like a ton of work :-) Thoughts?

[Crelow]

The guy that sold me my DF250 told me he sold many of them. I've yet to see one Locally. I'd love to go riding with them some day. But most of the bikes he sold would come back wrecked. Job security. Too bad he ended up getting a job out in Vegas.