Quote Originally Posted by barnone View Post
I'm going to make the plate and remove all the plumbing like I did on my old DF.

DF ais .jpg

Use the removed piece as a pattern to make the plate out of 1/8" or so aluminum plate. Paint it black. Put a cap on the vacuum port. Easy peasy.

On my old DF then I moved the ignition key switch to the place were the pump was. Kinda cleaned it up a bit. I don't know if this will work on the new model.

DF ignition.jpg
\




any chance you could make an extra and send it out this way for a little $?