Quote Originally Posted by barnone View Post
I used my Harmonizer to adjust the idle air/fuel screw on the bottom of the carb and also verified the tachometer reading. It's a neat tach but is slow to respond so you see a little difference.
The stock (blue marks which were off a little before adjusting) setting on the screw seemed to be just right after I set it.

IMG_2118.JPG

IMG_2120.jpg

Yesterday I removed the tank and got some slack n the wire going to the ignition switch so I could mount it right side up in the place where the air pump was mounted.

Got a ride in between rain showers with the 35 tooth rear sprocket and she went up my steep gravel drive just fine in first gear. I'm gonna break her in slow so no top speed runs yet but first gear is now useful.

Also made a plate to block the hole where the air injection tube was.

She seems nice and solid with very little vibration.

Im not sure why i want to, but i think I want to move my ignition as well...
That or put in some High Low snail horns, with the engine going I can hardly hear the the stock button horn, so how can i expect some old lady that cuts me off to hear it...