Have an emergency, if anyone is aboad here. I redid the wiring for my bike,making sure every wire was attached to the same wire it was attached to before. Now here is what is happening. evrything seems to work, I get power to and from the starter switch on the bars, and all the way to the starter relay, but It will not turn the starter over. I bought a new relay and just put it on, but still the same issue.. not start. I checked again with my test light, and all wires get power when i press the switch.But the wire to the starter from the relay is still not getting power. Common sense tells you that the relay is not good ..correct? Here is my question.I bought a relay from a scooter place that is supposed to be for a 250cc motor. Now, are the relays that critical? is there one I should buy and instead of this one I have? I looked all over ebay and found a few that look similar, but is the current an issue?

Also what does a CDI do? just wondering if my problem lies somewhere else. Now I did hot jump the starter while the wires were attatched on the relay, just a quick tap, and it works. I am nuts here with this. Driving me batty.