Thread: CF 650 no pump, no error code
Results 1 to 10 of 11
|
|
Threaded View
-
#3 Re: CF 650 no pump, no error code
05-29-2018, 01:58 PM
Hi Gorka
Got your PM OK.
Just got back tonight from the CFmoto open day.
On the way to the show my MT was playing up, power would come on and then cut off at different speeds.
At the show, CFmoto had there top services engineers, and I was able to get them to check my bike out.
There had a pressure gauge that there connected to the fuel pump outlet to check the pressure of the pump?
There found the pressure to be low, so there changed the pump and all is fine now?
Now what I would do is check to see if you have a voltage at the pump under the tank?.
If it's not the Fuel pump and the bike will still not work.
Then check the "Tip over switch" it's a common fault and it the tip over switch is not resetting then the bike will not start?
"Arguing on the Internet is like running in the Special Olympics, even if you win you're still retarded"
| « Previous Thread | Next Thread » |
Similar Threads
-
CFMoto ECU/ECM error code table & EFI error diagnosis
By bikerdoc in forum MaintenanceReplies: 8Last Post: 11-03-2019, 06:37 AM -
How to reset a CFMOTO 650NK/TR Error Code
By ZMC888 in forum MaintenanceReplies: 1Last Post: 07-04-2016, 04:26 AM -
How to reset a cfmoto 800 x8 error code
By Mlosada in forum MaintenanceReplies: 4Last Post: 06-08-2015, 10:42 PM -
650nk error code
By choldy in forum StreetReplies: 17Last Post: 10-03-2013, 11:41 PM -
Error code tables?
By wanglong in forum MaintenanceReplies: 3Last Post: 04-20-2011, 07:57 AM











What matters more to you on an 18+...
12-25-2025, 07:20 PM in Welcome to MCM!