Quote Originally Posted by david3921 View Post
Still More...

Here's the page off of the manual with the various lights and wattages;

SISTEMA DE ILUMINAÇÃO/sinalização/instrumentos

Item Especificações Quantidade

Lâmpadas Farol alto/baixo 12 V – 35/35 W Halógena 1
Lanterna do farol 12 V – 5 W 1
Lanterna traseira/luz do freio – STX 12 V – 5/21 W 1
Lanterna traseira/luz do freio – Motard Leds 1
Pisca 12 V – 10 W 4
Iluminação Painel com indicador de marchas 12V – 2W 4
dos instrumentos Painel sem indicador de marchas 12V – 2W 3
Indicadora de farol alto 12V – 2W 1
Indicadora de ponto morto 12V – 2W 1
Indicadoras dos piscas 12V – 2W 1
Indicador de marchas e neutro Display de leds 1
Fusível principal 15 A 1 (+ 1 Reserva)

Nope, I can't read this so we will need someone (forchetto?) to help out here. I did run it through the translator and some of the results need clearification. I can figure most out but am curious why it's not showing any wattage for the LED lights. I know it's low but is does draw some. I know I can get some wattage back by going to LED turn signals but how much? It looks like stock ones are drawing 10W each and only two are running at any given time. The payback might not be worth it except for not having to change bulbs.
I am sending this information over to help with calculations.



LED high-brightness 5mm - RED

FEATURES

Color: RED
Size: 5 mm
Bulb: Clear
Wavelength: 640 ~ 645 nm
Voltage: 1.8 ~ 2.2 v
Reverse current: <= 30 uA
Luminous Intensity: 5000 mcd
Life: 100,000 Hours
Anglo opening: 20 ~ 25 degrees
Consumption: 80mW
Max Continuous Forward Current: 30mA
Max Peak Forward Current: 75mA
Reverse Voltage: 5 ~ 6V
Soldering Temperature: 240 ° C (<5sec)
Operating Temperature: -25 ° C ~ +85 ° C
Preservation temperature: -30 ° C ~ +100 ° C

INFORMATION

470ohm resistor (12v).

High intensity.
Low power consumption.
Excellent life.

Note When used in cars, use the resistor 560OHM because it is more appropriate to this link