Thread: Bashan BS200GY-18
Results 81 to 90 of 96
|
-
#81 Re: Bashan BS200GY-1804-09-2016, 12:40 AM
I am not in sales...I just do this for entertainment.
You should check the actual speed with a GPS or with a friend in a car. Also most of the Chinese speedos are off usually more generous, also your size affects top speed.
Count the teeth rear/front. 45/17= 2.65 which would be more for top end speed, here is a chart.
-
#82 Re: Bashan BS200GY-1804-09-2016, 03:39 AMBrian ,
2015 Bashan Storm 250
-
#83 Re: Bashan BS200GY-1804-09-2016, 04:17 AM
Check your valve lash.The specs were over on chinariders.com.I think spudrider can help you out with the specs.These engines tend to loose speed as the valves start to get tight with use.
-
#84 Re: Bashan BS200GY-1804-09-2016, 01:03 PM
i set them at about 100 miles, maybe it is time to check them again (350 miles), i will do that today, thank you for the advice ... and for anyone else looking at the thread, it is chinariders.net ... also for anyone interested, my book says 0.05mm for both valves
EDIT: book also says intake valve 0.04mm~0.06mm and exhaust valve 0.05mm~0.06mmLast edited by MR.Barlow1; 04-09-2016 at 02:01 PM.
Brian ,
2015 Bashan Storm 250
-
#85 Re: Bashan BS200GY-1804-09-2016, 07:27 PM
I always set my valves on the loose side of the tolerances,so I don't have to open the engine as often.I'm currently dealing with my CB500X shim on valve set up.I have to remove the rocker arms and rocker shafts to change the shims.I had to order specific sized shims from Honda,which took two weeks to get to me.Tomorrow,I hope to finish the job.
-
#86 Re: Bashan BS200GY-1804-09-2016, 11:03 PMBrian ,
2015 Bashan Storm 250
-
#87 Re: Bashan BS200GY-18
-
#88 Re: Bashan BS200GY-18
- Join Date
- May 2016
- Location
- USA
- Posts
- 3
05-09-2016, 10:54 PMWhere can a guy find a repair manual for one of these?
-
#89 Re: Bashan BS200GY-18
-
#90 Re: Bashan BS200GY-18
- Join Date
- May 2016
- Location
- USA
- Posts
- 3
05-11-2016, 04:15 PMI find it VERY difficult to believe that there are NO manuals on these motorcycles. So the Chinese owners and mechanics can just look at or touch a motorcycle and know how to fix it by magic powers?
The Chinese must have shop manuals. There must be manuals somewhere. Even if they're in Chinese it would help some. Besides, Chinese can be translated into English by Google Translate or a Chinese acquaintance or something. My daughter-in-law is Chinese for goodness sake.
What about this:
zongshen-lx200-250-china-motorcycle-repair-manual-workshop-manual_1.jpg
http://www.motorsportgoetz.com/Zongs...ual_1?curr=USD
This looks like it might be in German and English. Do these bikes sell in England or Germany? Maybe those countries have manuals available. It looks like it from this one I found on the web.
Maybe I'm just odd, but I think having a repair manual is not too much to ask for and I'm extremely surprised the manufacturers of these motorcycles don't offer them through their distributors or at least make them available on their websites.
« Previous Thread | Next Thread » |
Similar Threads
-
Bashan 重庆航天巴山摩托车制造有限公司
By MJH in forum Industry News and Moto TalkReplies: 21Last Post: 05-22-2015, 08:21 AM -
Bashan xplode 250cc
By kyton in forum Dirt n' Dual-SportReplies: 1Last Post: 02-07-2013, 09:29 AM -
Bashan 200s3 starting problems
By hippie nixon in forum ATV's/QuadsReplies: 1Last Post: 12-29-2012, 05:38 AM -
Bashan BS125GY
By NDak83 in forum Dirt n' Dual-SportReplies: 3Last Post: 11-04-2012, 04:51 PM -
Need Service Manual for Bashan 200St (Zongshen Engine)
By vlacexx in forum ATV's/QuadsReplies: 7Last Post: 09-02-2012, 01:45 PM
The Pillars of Salubrity:...
05-12-2024, 12:12 PM in Off Topic Discussions