Quote Originally Posted by ben2go View Post
I always set my valves on the loose side of the tolerances,so I don't have to open the engine as often.I'm currently dealing with my CB500X shim on valve set up.I have to remove the rocker arms and rocker shafts to change the shims.I had to order specific sized shims from Honda,which took two weeks to get to me.Tomorrow,I hope to finish the job.
checked valves a little while ago, exhaust was tight again ... set them both to 0.06mm and it did help, about 1/8 or just a little less throttle left at 55mph 60mph still about the best i get, but better ... thanks for reminding me