Quote Originally Posted by MR.Barlow1 View Post
i set them at about 100 miles, maybe it is time to check them again (350 miles), i will do that today, thank you for the advice ... and for anyone else looking at the thread, it is chinariders.net ... also for anyone interested, my book says 0.05mm for both valves
EDIT: book also says intake valve 0.04mm~0.06mm and exhaust valve 0.05mm~0.06mm
I always set my valves on the loose side of the tolerances,so I don't have to open the engine as often.I'm currently dealing with my CB500X shim on valve set up.I have to remove the rocker arms and rocker shafts to change the shims.I had to order specific sized shims from Honda,which took two weeks to get to me.Tomorrow,I hope to finish the job.