Results 1 to 10 of 6337
|
|
Threaded View
-
#11 Re: Dong Fang DF 250 RTB Bobber InformationC-Moto Senior
- Join Date
- Feb 2011
- Location
- NY
- Posts
- 124
03-13-2011, 07:59 PM
Here are a fe more things I am going to order today.
set of 10 jets http://cgi.ebay.com/ebaymotors/ws/eB...#ht_2600wt_935
Also you guys might want to get a new CDI to hep with the mid/top end:
http://cgi.ebay.com/ebaymotors/Racin...#ht_1358wt_897
or
http://cgi.ebay.com/ebaymotors/Racin...#ht_1358wt_897
Also you should remove the crap sparkplug it came with and go get a NGK
It sounds like we should have a 105-110 main jet in there, but might not if the CDI and NGK help out.
I was also thinking of a better coil as well, either one of the cheap chinese ones on ebay or a very good one from http://www.nologyhotwires.com/
from nology search for 152-001-060T we would need the single spark plug wire one for $69.99
Im not sure if the chinese coils would be any better then the stock on that comes with the bike to begin with, so I would say stick with nology if your going to do this upgrade. I also found twin tec coild pretty cheap http://www.jpcycles.com/product/382-...utm_medium=cse
All single fire coils should work for any of these single cylinder clones. And I'm sure it would be a very big improvement in the performance for these engines when using the aftermarket CDI.
| « Previous Thread | Next Thread » |
Similar Threads
-
Help ID this customized chinese bobber please?
By fonzerelli in forum StreetReplies: 6Last Post: 01-16-2022, 01:39 AM -
DD350E-2 Bobber
By xacarrere in forum Manufacturers and ImportersReplies: 2Last Post: 08-28-2015, 12:03 PM -
Bobber Bikes
By Geronimo in forum SidecarsReplies: 12Last Post: 07-20-2011, 05:02 AM -
my 2nd 16 inch bobber
By Geronimo in forum SidecarsReplies: 3Last Post: 09-13-2010, 11:10 AM -
JH600B Information Wanted
By blazeafar in forum Welcome to MCM!Replies: 1Last Post: 04-29-2008, 12:38 PM
| Tags for this Thread |











What matters more to you on an 18+...
12-25-2025, 07:20 PM in Welcome to MCM!