Results 2,871 to 2,880 of 6337
|
-
#2871 Re: Dong Fang DF 250 RTB Bobber Information
-
#2872 Re: Dong Fang DF 250 RTB Bobber Information
- Join Date
- Aug 2011
- Location
- texas
- Posts
- 266
03-01-2013, 04:46 PM
=Crelow;53918]But what do you guys think of me putting a piece of sheet metal between the Dildo and the engine to block the smog. Remove the hose and Cap in case i ever need to put it back on.
-
#2873 Re: Dong Fang DF 250 RTB Bobber Information
- Join Date
- Feb 2013
- Location
- las vegas, nv
- Posts
- 198
03-02-2013, 09:30 PM
Last edited by chruk bashre; 06-26-2013 at 08:40 PM.
-
#2874 Re: Dong Fang DF 250 RTB Bobber Information
- Join Date
- Aug 2011
- Location
- texas
- Posts
- 266
03-02-2013, 11:20 PM
simple , but the 520 sprockets not work with 428 chain , u need new front and rear sprockets and the chain
but not "really" needed , as my 1 more tooth upfront is the same as 3 less in rear
no grinding involved
-
#2875 Re: Dong Fang DF 250 RTB Bobber Information
03-04-2013, 06:24 PM
Is it possible to put a kick starter on our bikes?
2010 Dong Fang 250RTB
-
#2876 Re: Dong Fang DF 250 RTB Bobber Information
-
#2877 Re: Dong Fang DF 250 RTB Bobber Information
03-05-2013, 02:34 AM
You always can drop it in second roll it and pop the clutch, and drive away. Next best thing to a Kick.
Man.. This winter is killing me, 12 more inches coming down here I guess next two days.
The roads were just getting almost ready to ride then, blam. more ice and snow.Goodbar with Blue Fanger DF 250 RTB
-
#2878 Re: Dong Fang DF 250 RTB Bobber Information
03-05-2013, 03:05 AM
Hey Goobar, Got my new air filter today, had to do the roll start the other day as the batt was low from sitting around in the cold weather. I'm not going to do the mods until after the State inspection. Got the MSO today also, good mail day. Tomorrow I'm going to get the insurance and see about getting one of my buddy's to trailer it down to the DMV for the inspection. Found another crank case breather (pics) and I'm for sure doing the anti smog block removal. Hope you get some sunny days soon.
100_0792.jpg100_0795.jpg
-
#2879 Re: Dong Fang DF 250 RTB Bobber Information
03-05-2013, 04:09 AM
Bob, Glad you got your MSO 2/3rs the battle. The filter should work great. Paint er black. This type actually will work the best as the juices will run back into the crank where they belong if you attach it with a real short hose from the crank straight up. I cant believe they need to inspect the DF, what a BS deal is that. Your tax dollars at work. Whats the weather like in Northeast NV this time of year? i'll bet all over the map/warm then cold, snow up higher? I drove thru there in May several years ago and it was sunny and warm and rolling and Hilly but very scenic as I remember, Think I saw some antelope on some of the grassy ridges. I must be a glutton for punishment ,I Just bought and brought home a Russian Bike also a 2012 URAL Patrol with a side car. needs lots of Mods and tweaks also. But very cool bike. Man this thing takes up a lot of room in the Garage. This I can ride in the snow with its 2WD. Just worried the salt will eat it alive because there is no way to wash it in the winter and my Garage is heated/ bad combo.
Goodbar with Blue Fanger DF 250 RTB
-
#2880 Re: Dong Fang DF 250 RTB Bobber Information
03-05-2013, 04:44 AM
Rubies from 4th & Ash.jpg4.jpg
They have real nice fishing here too.
Elko is a nice place to live. Small and far away from everything, but beautiful if you know where to look.
I'm cramped for space too. I have a car, small lathe and mill, plus a fishing boat, compressor, two bandsaws, and so many tools I can never find the one I'm looking for in my garage.
My hobbies are what keep me alive.
Congrats on the new bike. Wish I was there to help you dig into it.
Oh yeah, your right about the weather 50 one day -5 the next. We had a good snow year so there will be lot of water in the summer. Right now most of the snow is gone here in the valley but the surrounding mts are loaded with snow.
I'll take your advice on the breather, thanks again.Last edited by Bob form NV; 03-05-2013 at 05:29 AM.
« Previous Thread | Next Thread » |
Similar Threads
-
Help ID this customized chinese bobber please?
By fonzerelli in forum StreetReplies: 6Last Post: 01-16-2022, 01:39 AM -
DD350E-2 Bobber
By xacarrere in forum Manufacturers and ImportersReplies: 2Last Post: 08-28-2015, 12:03 PM -
Bobber Bikes
By Geronimo in forum SidecarsReplies: 12Last Post: 07-20-2011, 05:02 AM -
my 2nd 16 inch bobber
By Geronimo in forum SidecarsReplies: 3Last Post: 09-13-2010, 11:10 AM -
JH600B Information Wanted
By blazeafar in forum Welcome to MCM!Replies: 1Last Post: 04-29-2008, 12:38 PM
Tags for this Thread |